In short
- Replit gives every app separate development and production databases, and Agent can only read production through a read replica. With Cursor, the database is wherever you put it, with the access rules you wrote.
- Replit's shared responsibility model lists access control, user management and penetration testing of your app as yours. Cursor's hosting terms say it is not responsible for your apps.
- A Replit app published from a personal workspace is Public by default. Check the Sharing setting before anything else.
- Replit's Level 3 scan runs a black-box test, but against the Preview. Cursor's reviews read pull requests. Neither tests the published app with its production data.
- The same three leaks ship from both: routes without an owner check, secret keys in the JavaScript, and AI routes anyone can call.
On this page
The short answer
Replit and Cursor both write an app from a prompt, and they are different kinds of product. Replit is a hosted builder: Agent writes the code in Replit's cloud, Replit runs the database, stores the secrets and publishes the app. Cursor is an editor with an agent: the code is on your machine or in your repository, and you choose where the database and the hosting go, unless you use Cursor's own Apps hosting.
That difference decides most security questions before you write a line. On Replit, the platform sets many defaults and scans for you. With Cursor, almost every setting is one you or the agent created. This page compares where the data ends up and who configures access, from each vendor's documentation as read on 13 November 2026. It does not compare the quality of the code they write. The single-tool pages go further: is Replit safe and Cursor app security.
Replit vs Cursor: security side by side
| Question | Replit | Cursor |
|---|---|---|
| Where the agent runs | In Replit's cloud workspace | On your machine, or on Cursor's cloud agents |
| Where the code lives | In the Replit project | In your folder and your Git repository |
| Database | Replit's managed PostgreSQL 16: one database for development, one for production | Yours to choose: Supabase, Firebase, your own Postgres. Cursor Apps provisions a Postgres database |
| What the agent can do to production data | Agent cannot modify production. It reads it through a read replica | Whatever the credentials on your machine allow |
| Sign-in for your users | Clerk by default on Starter, Core and Pro; Replit Auth by default on Enterprise | Whatever you ask the agent to add |
| Secrets | Secrets tool, AES-256 at rest, read as environment variables, separate production secrets | Your .env files locally, your host's settings in production. Cursor Apps asks for secrets and hides the values from the agent |
| Who can open the published app | Sharing setting: Public, Password protected, Workspace only, Invite only. Public by default in a personal workspace | Your host decides. Cursor Apps: Cursor sign-in for private and team apps |
| Built-in scans | Security Center Level 1 (dependencies, free), Level 2 (source review), Level 3 (adds a black-box test of the Preview) | Bugbot and Security Review on pull requests, /review-security on a branch, publish checks on Cursor Apps |
| What the vendor says about your app | "You own the code Agent generates and you're responsible for it." | Cursor provides tools and is not responsible for your apps |
Where the data ends up
On Replit: inside the platform
Each Replit app has two databases on Replit's managed PostgreSQL. You and Agent work on the development database. The production database is created when you publish, and holds your live data. Agent can add or delete tables in development. It cannot modify production: it reads it through a read-only replica. Publishing applies schema changes to production with drizzle-kit, including row level security policies, but not functions, triggers or grants.
This split exists for a reason many people remember. In July 2025, Replit's agent deleted a production database during a code freeze, and Replit answered by separating development from production. The result is a real protection against the agent itself. It says nothing about who can read the data through your app.
The other consequence: in a standard Replit app, the browser does not talk to the database. Every record leaves through a route in your own server. So the access rules that matter are in that server code, written by Agent.
With Cursor: wherever you put it
Cursor has no default stack and no default database. The agent writes for whatever your repository uses or your prompt names. With Supabase or Firebase, the browser queries the database with a public key and database rules are the only lock. With Postgres behind API routes, the app works like a Replit app. Either way the database account is yours, the keys are on your machine and in your host's settings, and nothing stands between the agent's terminal and production except the credentials you gave it.
Cursor's own hosting, Apps, sits in between. On paid plans with cloud agents, Cursor hosts the app in an account isolated from other customers, provisions Postgres when needed, and asks you for secrets without showing their values to the agent.
Who configures access
Both vendors write it down, and they agree. Replit's shared responsibility model gives Replit the platform, the encryption, the edge protection and the Agent's tooling. It gives you access control ("which users have access to which resources"), user management, secrets management and "security testing of the application you build". Cursor's Apps documentation says it provides technology and tools and is not responsible for your apps.
| Decision | On Replit | With Cursor |
|---|---|---|
| Can a visitor open the app at all | You, with the Sharing setting. Changing it means unpublishing and publishing again | You, on your host. On Cursor Apps: invite, team or public |
| Who can sign in | Clerk or Replit Auth handles sign-in | The auth library or service you added |
| Which records a signed-in user can read | Your server routes, written by Agent | Your routes, or your Supabase and Firebase rules |
| Which keys reach the browser | Your frontend code and build variables | Your frontend code and your host's variables |
| Who can see secret values in the team | Collaborators can. Organization members who are not Owners can still print them from the environment, Replit notes | Anyone with the repository's .env files or access to the host |
What each platform scans
Replit has more security tooling in the box, and it deserves credit for it. Level 1 checks your dependencies for known vulnerabilities and is free. Level 2 adds a source review by Agent, combined with static analysis, on paid plans. Level 3 adds an external black-box test of the live Preview: on apps with Clerk auth it runs one anonymous pass and one as a synthetic user, and creates a second synthetic user when it needs to check an ownership boundary. That last point is close to a real attacker's view.
Cursor's tools work on code. Bugbot reviews each pull request, Security Review looks for vulnerabilities in pull requests, /review-security does the same on your branch, and apps hosted on Cursor Apps pass four publish checks that block API keys and credential files, drop .env files and remove source maps. If you host elsewhere, you get the reviews and not the publish checks.
Replit's docs state the limits plainly: "A clean dependency scan does not mean your own code has no vulnerabilities". They say the same of a passing publish check, and add that no scan proves an app is safe: use scans next to code review, tests and other checks.
What neither of them checks: the published app
Here is the gap both leave. Replit's deepest scan tests the Preview. Your published app runs with its own production database, its own production secrets and real users. Cursor's reviews stop at the pull request, and unless Cursor hosts the app, it never sees the deployment.
| On the live app | Replit app | Cursor app |
|---|---|---|
| Database policies | The database is not exposed to the browser, so the leak is in your routes. If you added Supabase or Firebase, their rules apply and Replit does not manage them | Supabase tables without row level security, Firebase rules open to any signed-in user |
| Keys in the bundle | A secret copied from Secrets into frontend code or a build variable | A secret under a NEXT_PUBLIC_ or VITE_ name on your host |
| Per-user access | A route with a sign-in check and no owner check | The same, or a policy that says to authenticated and nothing else |
| Exposure by default | An internal tool published as Public | A preview deployment wired to production data |
The database rule problem has a public measure. CVE-2025-48757 was assigned after 170 of 1,645 Lovable apps tested, about one in ten, had missing or weak row level security on Supabase. A Cursor app on Supabase can fail the same way, and so can a Replit app that uses Supabase instead of Replit's database. See the Supabase RLS guide.
A self-check for either one
Run these against your own published app only.
- 1
Check who can open it
On Replit: Tools, then Publishing, then Sharing. An internal tool or a beta with real data belongs in a private option. With Cursor: check on your host that preview deployments are not public with production data behind them.
- 2
Run the platform's own scan
On Replit, run Security Center Level 1, and Level 2 or 3 on a paid plan. In Cursor, run
/review-securityon your branch. Fix what is real, then publish again: a fix is not live until you do. - 3
Call your routes signed out
Use the app with the network tab open and note the
/api/routes that return personal data. Call each one with the first command below. Each should answer 401. - 4
Repeat as a second account
Sign up twice. As account B, request a record that account A created, with the second command. Anything other than 403 or 404 is an IDOR vulnerability.
- 5
Search what you ship for keys
Build the app and run the
grepbelow, or paste your address into the API key leak checker. If a secret was ever in the bundle, rotate it first. - 6
If you use Supabase
Run the SQL below. Every table it lists is readable with the public key unless a policy says otherwise.
# Your own app only. Signed out: expect 401, never records.
curl -i https://your-app.example/api/bookings
# As account B, a record created by account A: expect 403 or 404.
curl -i https://your-app.example/api/bookings/ID_CREATED_BY_A \
-H "cookie: SESSION_COOKIE_OF_B"
npm run build
grep -rlE "sk_live_|rk_live_|sk-proj-|sk-ant-|whsec_|postgres(ql)?://" dist .next/static 2>/dev/nullselect schemaname, tablename
from pg_tables
where schemaname = 'public'
and rowsecurity = false
order by tablename;The fix for the two route bugs is the same on both platforms: refuse calls without a session, then put the signed-in user's id in the query, so a record that belongs to someone else is simply not found. Give the agent that sentence as a rule, and ask it to list every route with what it checks before it changes anything. The vibe coding security checklist has the rest.
Which one fits which builder
On security alone, each is the better choice for someone.
- Replit suits you if you do not want to run a database, a host and a secret store yourself. The development and production split, encrypted Secrets, private publishing options and built-in scans are sound defaults that a first-time builder would not set up alone.
- Cursor suits you if you already have a repository, a review process and accounts you control. You get pull request reviews, hooks and rules, and no platform between you and your infrastructure. You also get no safety net you did not build.
- In both cases the vendor has told you in writing that access control in your app is yours.
Where Keybrum fits, and where it does not
Keybrum does not test Replit's platform or Cursor's editor. It does not look at Replit's workspace, its sandboxes or Agent's permissions, nor at what Cursor's agent may run on your machine. It does not replace Security Center or Bugbot either: run those first.
Keybrum attacks the published app, at its public address, with production data behind it, once its owner has proved ownership. On a Replit app it collects the API routes your JavaScript calls and calls each one with no session. It creates a marked record as one account, asks for it as a second one, then tries one reversible change. It posts a short prompt to AI routes without a session, sends one unsigned event to the Stripe webhook, checks whether keys in the bundle work, and requests /.env and source maps. On a Cursor app with Supabase or Firebase, it also reads tables and collections with the public key, signed out and as a new account. Each finding comes with the request that worked and a fix prompt for the agent.
A one-time report is €49 for one app, with retests of its findings for 7 days. Plans start at €29 a month excluding VAT for 5 apps and attack again on every deploy.
Questions
Is Replit safer than Cursor?
Replit makes more decisions for you: a managed database split into development and production, encrypted secrets, and scans built in. Cursor leaves those choices to you. That helps beginners on Replit, but neither platform decides which records each of your users can read. Both say in their documentation that this part is yours.
Where is my data stored with Replit and with Cursor?
On Replit, in Replit's managed PostgreSQL, with one database for development and one for production. With Cursor, in the database you chose and the accounts you own, unless you host with Cursor Apps, which provisions a Postgres database for the app.
Can the AI agent delete my production database?
On Replit, Agent cannot modify the production database: it only reads it through a read replica, a change made after the July 2025 incident. With Cursor, the agent can do what your local credentials allow, so do not keep production database credentials on the machine where it runs commands.
Does Replit's AI pentest cover my published app?
Replit's documentation describes Level 3 as an external black-box test of the live Preview. The published app has its own production database and secrets, so test it too: signed out, and as a second account.
Are Replit apps public by default?
Apps published from a personal workspace default to Public; apps in an organization workspace default to a private option. You can choose Password protected, Workspace only or Invite only under Sharing. Changing access on a live app requires unpublishing it first.
Can I build in Replit and then move to Cursor?
Yes, the code is yours. Moving means you take over what Replit handled: the database and its backups, the secrets, the hosting and who can open the app. Recheck each of those on the new host, and test the live app again, because the environment changed even if the code did not.
Sources
- 1.Replit shared responsibility model, Replit
- 2.Development and production databases, Replit
- 3.Security scan levels, Replit
- 4.Black-box pen tests, Replit
- 5.Who can access your app, Replit
- 6.Users & Auth, Replit
- 7.Secrets, Replit
- 8.Apps, Cursor
- 9.Agent security, Cursor
- 10.Security Agents, Cursor
- 11.Bugbot, Cursor
- 12.Replit makes vibe-y promise to stop its AI agents making vibe coding disasters, The Register
- 13.CVE-2025-48757, NVD